Thawzall TCH250/400GTS
Day
Week
Month
FEATURES
5-600FT HOSES
OVER 3 DAYS RUN TIME
RETURN TEMPERATURE INDICATORS ON ALL 5 ZONES
BI-DIRECTIONAL POWERED REEL WITH FREEWHEEL FEATURE
SIMPLE TO OPERATE WITH 1 SWITCH
HEATZONE FLUID DISTRIBUTION
1 SWITCH START UP with Digital Monitoring
HEAT ZONE FLUID DISTRIBUTION TECHNOLOGY
THREE WAY MIXING VALVE PROVIDES PRECISE TEMPERATURE OUTLET CONTROL. THE BEST FOR CONCRETE
CURING.
SPECIFICATIONS
Hose 5 – 600 ft Field Hoses (5/8” Hose)
Hose Unspool with one person
Supply Manifold 5 – 3/4” quick connect & 1 – 1” quick connect
Return Manifold 5 – 3/4” quick connect & 1 – 1” quick connect
Ground Thawing Capacity up to 6,000 ft2
Concrete Curing Capacity up to 12,000 ft2
Temporary Heating Capacity 12,000 ft2 (Varies with R-Value)
Field Pump 1/2 Hp closed Loop Centrifugal
Fuel Tank 150 US GAL DOUBLE WALL TANK
Run Time Up to 100 Hours (with Genset)
Fuel Consumption TCH 250 = 2.06 GPH, Genset = .55 GPH
Interior Lights Standard for ease of night operation
Heater Capacity Diesel 280,000 BTU/H Heating Fuel Input
Electrical Requirements 1 – 120V AC 20A Circuits
Generator (Optional) 1 – 7,000W
Hitch 2 5/16” Ball (Pintle also available)
Dimensions 170”x84”x93”
Weight (Fuel Full) 5900 lbs
THAWZALL TCH250 W/ Generator
- Better flow and heat transfer with newly designed “series flow pattern”
- Ease-of-use and newly designed Control box on rear passenger side
- Easier operator interface with all controls in one place
- Easy OFF-ON switch eliminates need for training
- More accurate cold weather concrete curing with simple temperature setting
- Alert for fuel gauge and low water for quick trouble shooting
- Faster thawing due to flow is increases from larger sized and shorter piping
- New Power-In-Power-out and free-wheeling feature for reel operation with dynamic brake
- L x W x H
- 170in x 84in x 97in
- Weight w/fuel & fluid
- 5,600lbs
- Optional Generator
- 310lbs
- Fuel Capacity
- 160gal
- HTF (Heat Transfer Fluid)
- 122gal
- One – 1/2 hp Pump
- Closed Loop Centrifugal
- Hose Length (5 zones x 600’)
- 3,000ft
- Electrical, GFI
- 20 amp x 120 vac
- HTF Pumpability
- -80°F
- Fuel
- Winter blend diesel or #1 fuel oil
- Hitch Choices
- Forged, Stamped, or Pintle
- Diesel Generator
- 7.0 KWH Liquid Cooled
- THAW frozen ground
- 3,000-6,000 sq ft
- CURE concrete
- 6,000 sq ft
- with accessories
- 18,000 sq ft max
- FROST prevention
- 9,000 sq ft
- with accessories
- 27,000 sq ft max
- HEAT buildings
- 400,000 cu ft
- Input/Output
- 280/234 MBH*
- Operating Range
- 70-200°F
- Operating Pressure
- 1-5 psi
- Fuel Consumption (max)
- 1.75 gph
- Run Time
- 3+ days
- Pump Capacity
- 30/1800 gpm/gph
Rental Terms & Conditions
- All rentals are subject to credit approval.
- Rental rates are based on a single shift 8 hour day, 40 hour week and 176 hour month.
- Double shifts are at 1.75 the single rate, triple shifts are bill at 2.50 the single shift rate.
- Customers are responsible for all consumables such as; fuel, lubricants, filters, ground engaging tools (teeth, cutting edges, breaker chisels, etc), tire wear.
- Customer shall maintain the machine by performing the prescribed daily machine inspections and maintenance.
- Customer is required to carry adequate Physical Damage and Liability Insurance listing Rasmussen Equipment Company as additional insured. Certificate of Insurance must be on file at Rasmussen Equipment Company.
- Customer is expected to use the machine in safe manner. Customer shall provide qualified operators who are trained in proper operating procedures. The customer must also ensure that the machine’s safety features such as back-up alarms, ROPS, etc., remain in proper operating condition while in customers possession.
- Customer is responsible for excessive wear or damage to machine such as broken glass, lights, bent or dented sheet metal, cylinders, tires, operation instruments, etc.
- Rental rates do not include any applicable taxes or permits.
- Customer responsible for all transportation charges. FOB Salt Lake City.